Dynamic Frequency Selection or DFS is an amazing function which is legally required for all WiFi gadgets sharing the 5GHz band with radar. It allows your router to find and avert interference with 5GHz radar signals. You can use mywifiext.com web address to set up your extender and connect it to the existing router.
The IEEE 802.11 standard enables WiFi gadgets such as Access Points (APs) and routers to share the 5GHz radio spectrum with radar. Talking about radar signals, they are susceptible to interference from other gadgets with the use of the same spectrum. With the help of DFS, an AP or router is able to identify the radar signals and change their operating frequency to avoid interference. This whole procedure makes sure that radar systems transmit and receive precise data.
In case you find that the existing router is not enough to access high-speed internet throughout the home or office, switch to a Netgear wireless extender. Here are the steps to follow for performing a successful Netgear extender setup:
- Unpack your brand new Netgear range extender without damaging its accessories.
- Put it on a power outlet and switch the plug on.
- Now, take any WiFi-compatible gadget such as a computer, laptop or Mac.
- Double click on any web browser’s icon to open it.
- As soon as the internet browser is opened, write mywifiext.net in the address bar shown in the top-left corner.
- Press enter key via the physical keyboard or the on-screen one.
- After the loading process completes, mywifiext.net login page will appear in front of your eyes.
- Type the username in the first empty box while the password in another one.
- A dashboard will open known as Netgear Genie.
- All you need to do here is just walk through the instructions given on the displayed screen.
Once done, your Netgear extender is set up accurately. Now, connect it to the existing router or AP and enjoy a hassle-free internet speed all over the house or workplace.
Which Netgear Routers Support DFS or Dynamic Frequency Selection?
First things first, you need to find out whether your Netgear router provides support for DFS or not. In addition to this, get to know that which DFS channels your router supports.
To check if your router supports DFS, open the admin panel via the IP address 192.168.1.250 and navigate to the 5GHz radio channel settings. On the off chance that you see channels with the exception of 36, 48, 153, 161 and 165, it means your device provides support for Dynamic Frequency Selection channels.
On the other hand, if you don’t find the aforementioned channels listed in the 5GHz channel selector, change the settings to auto and then see the selected channel by checking the router status through mywifiext
How to Select a Dynamic Frequency Selection Channel on Your Netgear Router?
Any router which makes use of DFS channels must be able to avert interference with radar systems. In simple words, it means:
- Keeping a check for radar as soon as a channel is in use and quickly quitting the channel in case radar is identified.
- Making sure that a channel is free of radar prior to utilizing it.
- Removing a “radar” channel which is not in use for a particular time period.
Before we go further, ensure that your router is running the latest version of Netgear extender firmware on it.
In order to choose a Dynamic Frequency Selection channel on your Netgear wireless router, walk through the instructions underneath:
Step-1: Turn on your router properly and apply appropriate power supply to it.
Step-2: Switch on a computer and connect it to a WiFi network having fast speed.
Step-3: Open any web browser you like.
Step-4: In the top-left corner, you will see an empty box called address bar. Type routerlogin.net in it and press enter.
Step-5: A login window will come out similar to mywifiext.net setup page.
Step-6: Enter the right login credentials to continue.
Step-7: Choose a DFS-supported channel from the arising menu.
And there you are! You have successfully selected the DFS channel on your router.